Field services
MC2 Energy operates directly on your installations with specialized teams and appropriate tooling. Inspection, blade replacement, non-destructive testing: these operations are performed on-site in compliance with manufacturers’ technical requirements, aiming to limit your equipment’s downtime.
Extraction of R1 & R17 Compressor Blades
According to TIL 2347, the manufacturer recommends inspecting the R1 compressor blades of Frame 6 and 9 units to verify the correct design of the R1 blade profile.
Thanks to its patented specific tooling, MC2 ENERGY will proceed with the replacement of non-compliant blades.
This tooling allows us to control the duration of interventions on your installations while ensuring the integrity of your equipment and the safety of surrounding personnel.
We can also provide your blades for all GE rotor ranges.
Inspection of Rotor & Stator Compressor Blade Profile
MC2 ENERGY performs on-site visual inspection of rotor and stator blades.
Depending on the results of this inspection, damages noted on the inspected blades may, under certain conditions, be subject to profile restoration and re-compliance by our specialists.
Turbine Blade Replacement
Our “Bucket Specialists” and dedicated tooling also ensure the removal and reinstallation of your turbine blades, applying the standards dictated in the manufacturer’s TILs.
As with compressor blades, MC2 ENERGY can offer you the supply of new sets of turbine blades (new or refurbished).
Replacement & Shimming of Stator Blades
During the inspection recommended in TIL 1562, the replacement of stator blade shims may be necessary.
We are able to perform the removal, adjustment of Drop Check clearances, and locking of stator shims as recommended by the manufacturer.
We can also provide the shims and pins for locking, as well as new stator blades.
On-site Inspections
MC2 ENERGY can offer you the following inspections:
- Endoscopic;
- Geometric, surface, and hardness of tenons;
- Non-Destructive Testing (NDT) inspection of compressor blades;
- Measurement of “Drop checks”.
Following the results of these inspections, MC2 ENERGY will provide its recommendations and offer its services to best support you in restoring your equipment to condition.
